End Mill Gear Cutters

These End Mill Cutters required to cut double Helical Gears upto 30° angle.
Range : 8 Module to 40 Module
.635 DP to 3 DP

Scalping Cutter

Diameter: 6" to 8"
Length: 16" to 22"
These cutters are used to scalping copper & brass strips.
Material used is High Speed Steel Imported ( M-2/ M-35) grade.

Spline Cutter

These Cutters are furnished for Involute and Parallel Key Splines, Involute and Straight Sided Serrations. For special Spline Cutters, the Drawings of the components should be supplied.

Gear Shaper Cutter

SCT Manufacture Gear Shaping Cutters in Module, DP and CP series. Spur as well as Helical Shaper Cutters can be supplied in Disc, Hub and Shank Type Varieties. Material used is generally AISI M35 Grade and accuracies are as per DIN-1829 Standard Class ‘AA’ and Class ‘A’.

Profile modifications including Chamfer, Semi-Topping, Topping , Protuberance, Flat or Fillet Root can be provided.

Convex Cutter

As per ISS
Diameter: 50 mm to 125 mm
Width: 3.2 mm to 40 mm
Radius of circle: 1.6 mm to 20 mm
As per BSS
Diameter: 2.1/4" to 4.1/4"
Width: 1/8" to 1.1/2"
Diameter of Circle: 1/8" to 1.1/2"

Tap Flutting Cutter

From No. 1 to 8
To Cut Tap Flutes 1/8" to 2"